Underhaug Multifork is a robust tool for front or rear mounting, suitable for all transport tasks. It’s made for simple and easy adaptation to all types of front loaders and quick coupling frames, and can also be delivered with standard 3-point connection. A unique multi-tool for handling stone and many other loading and transport tasks such as: silage, dry manure, firewood, straw and hay bales, pallets etc. To get the necessary strength, the frame is made of solid pipes. After welding, the entire structure is cured according to Kvernelands special curing methods. The same goes for the tines after rolling. Underhaug Multifork is delivered with bent (960) or straight (980) tines with a distance of 10 or 20 cm. Two versions are available: one with a working width of 150 cm and one with a working width of 200 cm. The curved tines are especially suitable for various loading tasks and are very good for collecting / tailing stones. Since the main pipe comes up from the ground, there is less wear on the pipe. Equipped with a double-acting hydraulic top link, the Underhaug Multifork is an effective tool for breaking up stones and roots. Mounted on the front loader, it’s handy and efficient for handling silage, pine and dry manure. The four side tines provide good support on the sides and allow for larger loads. By removing some peaks, Multifork can be used as a pallet fork. Multifork is delivered without connection brackets. The program includes brackets for: Trima, Ålø, Bergsjø, Ålø type III, Large Volvo, Small Volvo and Stoll, or as a 3-point bracket with tip. Underhaug Multifork - for all transport tasks. Choose 10, 15, 20 or 30 cm tine distance. Curved or straight peaks. Available in 1.5, 2.0, 2.5 and 3.0 meter widths.
