PP and SAN import request Egypt

i need the contacts for factories to get qoutations for pp and san
for the pp Melting Point °C 160 - 163
Density g mL-1 0.90 - 0.91 (0.905)
Coefficient of Thermal Expansion x 10-5 cm / (cm °C) 8.0 - 10
Heat Deflection Temperature, 0.5 MPa °C 78 - 122
Heat Deflection Temperature, 1.8 MPa annealed (unannealed) °C
Thermal Conductivity W / mK 0.17 - 0.23
Rockwell Hardness, R Scale n/a R65 - R110
PROPERTY UNIT VALUE / RANGE
Tensile Strength, Yield at 23 C MPa 31 - 45
Tensile Strength, Break at 23 C MPa 18 - 22
Elongation, Yield % 10 - 12
Elongation, Break % 50 - 145
Tensile Modulus at 23 C MPa 1950
Other Properties
PROPERTY UNIT VALUE / RANGE
Processing Temperature
°C 200 - 280
Linear Mold Shrinkage cm/cm 0.01 - 0.02
Continuous Service Temperature °C 90 - 120
Electrical Properties
PROPERTY UNIT VALUE / RANGE
Volume Resistivity
Ohm-cm > 1016
Dielectric Strength V/mm x 104 2.3 - 2.5
Dielectric Constant @ 1 MHz n/a 2.1 - 2.6
Dissipation Factor @ 1 MHz n/a 0.0002 - 0.0005
for the abs
ABS (Acrylonitrile butadiene styrene)- TDS

PROPERTY METRIC UNITS ENGLISH UNITS
General
Density 1.01e3 - 1.21e3 kg/m^3 63.1 - 75.5 lb/ft^3
Mechanical
Yield Strength 1.85e7 - 5.1e7 Pa 2.68 - 7.4 ksi
Tensile Strength 2.76e7 - 5.52e7 Pa 4 - 8.01 ksi
Elongation 0.015 - 1 % strain 1.5 - 100 % strain
Hardness (Vickers) 5.49e7 - 1.5e8 Pa 5.6 - 15.3 HV
Fracture Toughness 1.19e6 - 4.29e6 Pa/m^0.5 1.08 - 3.9 ksi/in^0.5
Young's Modulus 1.19e9 - 2.9e9 Pa 0.16 - 0.421 10^6 psi
Thermal
Max Service Temperature 61.9 - 76.9 °C 143 - 170 °F
Insulator or Conductor Insulator Insulator
Specific Heat Capability 1.39e3 - 1.92e3 J/kg °C 0.331 - 0.458 BTU/lb. °F
Thermal Expansion Coefficient 8.46e-5 - 2.34e-4 strain/°C 47 - 130 µstrain/°F
Eco
CO2 Footprint 9.1e7 - 1.02e8 kg/kg 3.27 - 3.62 lb/lb
Recyclable Yes Yes